3. If the hazardous material comes in contact with your skin, immediately flush the affected area with copious amounts of water for at least 15 minutes, then seek medical attention. Contact. If the spill is large, if there has been a release to the environment or if there is no one knowledgeable about spill clean-up available, contact EHS at 609-258-5294 from 8:30am-4:30pm. This can be caused by equipment failure, human error, natural disaster or sabotage. 1 Pen, 1 Marker, 3 Twist Ties, and 4 Hazardous Waste Labels, 4 Pairs L Disposable Nitrile Gloves and 2 Pairs of Tyvek Shoe Covers, 1 XL Disposable Apron with Sleeves and 1 Pair of Chemical Splash Goggles, 1 XL Disposable Apron without Sleeves and 1 Pair of Safety Glasses, 3 x Hazardous Materials Bag (4mil thickness), 2 x Oil Absorbent Pillow (10 gallon capacity), 1 x Xsorb Premium Granules Absorbent (30 lb. West Campus, For non-emergencies, contact: Follow the protocols provided by USC EH&S, Safety Data Sheet (SDS), or by the manufacturer of a professional spill kit to clean up a minor chemical spill; see the. For hazardous materials specialists (usually members of hazardous materials teams), the training should address the care, use and/or testing of chemical protective clothing including totally encapsulating suits, the medical surveillance program, the standard operating procedures for the hazardous materials team including the use of plugging and patching equipment and other subject areas. Evacuate or shelter-in-place as appropriate, monitoring for UIC ALERTs.
1. Contact Us Attend to any people who may be contaminated. spill maine spills oil vassalboro environmental frequently witness asked questions response emergency dep gov Evacuate the immediate area, closing doors behind you.
However, in recent years new products have come into the marketplace, the use of which complement and increase the effectiveness of these traditional methods. This program is to be in writing. Use a wet cloth to fill in wall or door gaps. evacuation rodeo All involved workers need to be trained in the established operating procedures; in the use and care of spill control equipment; and in the associated hazards and control of such hazards of spill containment work. The ICS is an organized approach to effectively control and manage operations at an emergency incident. When spilled materials have been absorbed, use brush and scoop to place materials in an appropriate container. 9. If possible, hold your breath or cover your mouth with a cloth while quickly leaving the area. *Note: Lab personnel should NOT attempt to clean up a major chemical spill. Assisting Victim Exposed to Hazardous Materials: Strange Odor: DO NOT ATTEMPT TO CLEAN UP A SPILL OR RELEASE UNLESS YOU ARE TRAINED AND HAVE THE PROPER EQUIPMENT. Princeton, NJ 08540ehs@princeton.edu609-258-5294, 2022 The Trustees of Princeton University, Office of Environmental Health and Safety, Hazard Identification and Risk Assessment, Laboratory Access and Training Recommendations, Laboratory Equipment and Engineering Controls, SHIELD - Safety, Health, Inspection and Equipment Logistics Database, Administration of Biological and Chemical Hazards to Animals, Recombinant and Synthetic Nucleic Acid Molecules, Shipping and Receiving Biological Material, X-Ray Machines & Other Radiation-Producing Equipment, Personal Protective Equipment (PPE) for Construction, Recommended Spill Control Materials Inventory, Chemical Spill Response Protocol: VIsual Guide.
If outdoor temperatures will be outside of the range listed on the chemical container, contact. After use, please call EHS at 258-5294 to restock. The proper use of hose lines or hand-held portable pressurized applicators provides good mobility and permits the worker to deliver the agent from a safe distance without having to step into the untreated spilled material. Decontamination. When injuries or illnesses occur on the site or workplace, they will need to be investigated to determine what needs to be done to prevent this incident from occurring again. For extreme weather temperatures, review the temperature range for chemicals stored outdoors. OSHA does recommend, however, that at least two employees be designated as back-up personnel since the assistance needed may include rescue. Then evacuate the building and go to a safe area. Means for proper disposal of cleanup materials (in most cases, as hazardous waste) including contaminated tools and clothing.
Decontamination of the area following the cleanup. Using the chart below, determine the extent and type of spill. By directing the agent at run-off points or at the edges of the spill, the reactant solid will automatically create a barrier to slow or stop the spread of the material. iStar The purpose of the program will be the protection of employees at the site and will be an extension of the employer's overall safety and health program. ehs. In these situations, the individual in charge of the ICS will want to delegate different tasks to subordinates in order to maintain a span of control that will keep the number of subordinates, that are reporting, to a manageable level. Delegation of tasks can also be by function. Also those employers involved with treating, storing or disposal of hazardous waste as covered in paragraph (p) must have implemented a safety and health program for their employees. 911 then 314-935-5555.
Do NOT attempt to repair the cylinder or the valve. During large complex fires involving several companies and many pieces of apparatus, a command post would be established. An effective spill response procedure should consider all of the items listed below.
Take refuge in a small interior room with few, if any, windows or other connections to the outside environment. Examples of infectious materials include blood and other body fluids. Remain in a safe location to direct emergency personnel to the affected area. The maps below are interactive. Note: Additional spill kit materials and guidance for work with HF, Phenol and Mercury is detailed in the CHP. Read below how to prevent, protect against, and recover from a chemical release. If the pipework valves or equipment are leaking, repair, replace, or tighten fittings, as appropriate. Inventory of spill control materials and personal protective equipment. Material Safety Data Sheet (MSDS) information is available to all University personnel by calling 888-362-7416 or online at www.miami.edu/ As discussed in appendix B, no single combination of protective equipment and clothing is capable of protecting against all hazards. Emergency response plans. For a catastrophic release of gas, immediately evacuate the lab, close the door, and call DPS. Follow instructions in the Biohazardous Spill Clean-Up Guide Sheet for minor biohazardous spills. Any item or agent (biological, chemical, physical) which has the potential to cause harm to humans, animals, or the environment, either by itself or through interaction with other factors. Evaluation of decontamination methods and procedures should be performed, as necessary, to assure that employees are not exposed to hazards by re-using PPE. These new tools and agents are the things that employers will want to evaluate as part of their new technology program.
The program will need to be developed before work begins on the site and implemented as work proceeds as stated in paragraph (b). Faulty or improperly repaired regulators are a serious hazard. A comprehensive site safety and control plan should include the following: summary analysis of hazards on the site and a risk analysis of those hazards; site map or sketch; site work zones (clean zone, transition or decontamination zone, work or hot zone); use of the buddy system; site communications; command post or command center; standard operating procedures and safe work practices; medical assistance and triage area; hazard monitoring plan (air contaminate monitoring, etc. The Occupational Safety and Health Guidance Manual for Hazardous Waste Site Activities developed by the National Institute for Occupational Safety and Health (NIOSH), the Occupational Safety and Health Administration (OSHA), the U.S. Coast Guard (USCG), and the Environmental Protection Agency (EPA); October 1985 provides an excellent example of the types of medical testing that should be done as part of a medical surveillance program.
The following are general guidelines to be followed for a chemical spill. If a volatile, flammable material is spilled, immediately warn everyone, control sources of ignition and ventilate the area. A large complex incident may require many employees and difficult, time-consuming efforts to control. Two basic objectives of any PPE program should be to protect the wearer from safety and health hazards, and to prevent injury to the wearer from incorrect use and/or malfunction of the PPE. Improperly stored chemicals, faulty refrigeration, equipment malfunctions, and engines operated near outside air intakes, are some of the more common.
Some special agents, which when applied as recommended by the manufacturer, will react in a controlled manner with the spilled material to neutralize acids or caustics, or greatly reduce the level of hazard of the spilled material. TrojanLearn 911 then 314-935-5555 Training. that causes or may cause adverse effects on health or safety of individuals, the general public, or the environment. If anyone is experiencing symptoms of exposure (e.g., difficulty breathing, dizziness, irritation of the eyes, skin, or throat, blurred vision, fainting, etc.). Evacuation plans for the room or building, as appropriate.
Make yourself available to responding Environmental Health and Safety personnel to supply information to aid in clean up. All require annual refresher training. Open windows, doors, and vents, turn on fans for ventilation. Be able to quickly access the appropriate Safety Data Sheets (SDS) for all products in your area. Each contractor on the site needs to have its own safety and health program so structured that it will smoothly interface with the program of the site coordinator or principal contractor. Stay informed and follow directions from University officials and local authorities. animatronic restaurants enhance populated figures theme You may be at risk if a chemical is used unsafely or released in harmful amounts into the environment. The need for equipment to disperse, collect and contain spill control materials (e.g., brushes, scoops, sealable containers, etc.) 314-747-5092 It will provide the overall means for planning and implementing the needed safety and health training and job orientation of employees who will be working at the site. 8. 5. Do not return to the area until you are told by responders that it is safe, If it is safe to do so, prevent further chemical release, Attempt to prevent chemical from entering drains by using absorbent material or by blocking drains, Locate the Material Safety Data Sheet for the released chemical and provide it to responders, If you are outdoors during the emergency, you may be directed to go or stay indoors and shelter in place, If capable and you have the proper equipment, you can clean the spill yourself, Nights/Weekends call Facilities Operations Center at, Brush dry chemical or material off of yourself or others, Rinse the affected area with water for 15 minutes or until responders arrive, Utilize an emergency shower and/or eye wash station if available, If illness or injury is present, provide care for the injuries if you are comfortable doing so. The individual in charge of the ICS is the senior official responding to the incident. Specialist employees such as technical experts, medical experts or environmental experts that work with hazardous materials in their regular jobs, who may be sent to the incident scene by the shipper, manufacturer or governmental agency to advise and assist the person in charge of the incident should have training on an annual basis.
If the regulator is leaking, immediately discontinue use and send the regulator back to the manufacturer for repair or replace with a new regulator. The rapid and uniform distribution of the agent over the surface of the spilled material can provide quick vapor knockdown. Delegation of task at large incidents may be by location, where the incident scene is divided into sectors, and subordinate officers coordinate activities within the sector that they have been assigned. Discuss the spill response plans with all employees in the area. Avoid breathing vapors of the spilled material. Contact Biosafety at [emailprotected] for additional information. It is also their responsibility to have spill control and personal protective equipment appropriate for the chemicals being handled readily available. In the event of a non-toxic and non-flammable (e.g. More detailed procedures may be available in your Departmental Chemical Hygiene Plan or Spill Response Plan. However, strategy, tactics, and all decisions were made by one individual. If additional assistance is not needed, the individual in charge of the ICS would implement actions to stop and control the leak using the fewest number of personnel that can effectively accomplish the tasks. Also for a large incident, the individual in charge of the ICS will designate several employees as back-up personnel; and a number of safety officers to monitor conditions and recommend safety precautions. North/West/South Campus All workers performing hazardous substance spill control work are expected to wear the proper protective clothing and equipment for the materials present and to follow the employer's established standard operating procedures for spill control. References in appendix D may be used for guidance in establishing an effective decontamination program. dominic The solidification of liquids provides for rapid containment and isolation of hazardous substance spills. Reference the, Notify emergency responders of the exposure immediately.
Accidents on the site or workplace should be investigated to provide information on how such occurrences can be avoided in the future.
For major biohazardous spills, notify DPS. It also offers guidance for the officer corp who will be in charge of hazardous substance incidents. *, Be prepared to provide information about the name and quantity of the material, the location of the incident, number of people who have been injured or exposed, and if fire or explosion has occurred, Follow all instructions that you are given, As you evacuate the area, alert others of the release and encourage them to leave the area, if it is safe to do so, Request that exposed individuals remain nearby until emergency responders arrive, Isolate the area and wait for responders to arrive. The type of hazardous material will dictate whether it is best to: Take the victim to get eyewash or safety shower. Account for those with you (and notify your direct supervisor if an employee), with their names and affiliation: student, employee, or visitor. Five gallon pails or 20 gallon drums with polyethylene liners may be appropriate for larger quantities.
EHS maintainsEHS chemical spill control kitsthat can be used if no other materials are available. Receipt of employee suggestions or complaints relating to safety and health issues involved with site or workplace activities is also a feedback mechanism that can be used effectively to improve the program and may serve in part as an evaluative tool(s). Fire Safety and Emergency Planning The ICS is a very similar system, except it is implemented for emergency response to all incidents, both large and small, that involve hazardous substances.
To illustrate the operation of the ICS, the following scenario might develop during a small incident, such as an overturned tank truck with a small leak of flammable liquid. If the cylinder or cylinder valve is leaking, immediately contact the supplier.
7. This enabled one individual to be in charge of managing the incident, rather than having several officers from different companies making separate, and sometimes conflicting, decisions. Safety Data Sheets, About Us Just click on the building, EAP or AED for information. Medical surveillance programs. For a small incident, the individual in charge of the ICS may perform many tasks of the ICS. Know which hazardous materials are in your area, their locations and safety actions to respond. Immediately notify affected personnel to evacuate the area. Appendix C to 1910.120 - Compliance Guidelines. 
Direct others to a room with fewer doors and windows above the ground floor. An example of a large release is a ruptured tanker truck. The written PPE program should include policy statements, procedures, and guidelines. If there is a fire or medical attention is needed, contact Public Safety at 609-258-3333. The safety and security of response personnel and others in the area of an emergeny response incident site should be of primary concern to the incident commander. Copies should be made available to all employees, and a reference copy should be made available at the worksite. Employers involved with treatment, storage, and disposal facilities for hazardous waste, which have the required contingency plan called for by their permit, would not need to duplicate the same planning elements. Those items of the emergency response plan that are properly addressed in the contingency plan may be substituted into the emergency response plan required in 1910.120 or otherwise kept together for employer and employee use. Associate Director Acquire sufficient quantities and types of appropriate spill control materials to contain any spills that can be reasonably anticipated. How a chemical spill is handled is dependent on its size, associated hazards of the released material(s), available resources, and the experience/competence level of the laboratory personnel/responder. Site Safety and Control Plans. Discard clothing that may be contaminated; some chemicals do not wash out completely. Click on the image below to view the guide, or download as a PDF here. Avoid eating or drinking anything that may have been exposed to the chemical. Try not to inhale gases, fumes, and smoke. Do NOT attempt to disassemble or repair regulators.
The use of a site safety and control plan could greatly assist those in charge of assuring the safety and health of employees on the site. bag), 2 x 10 ft. Universal Absorbent Sock (3 diameter). There may not be any, or little, delegation of tasks to subordinates. Develop a spill response plan that includes: Names and telephone numbers of individuals to be contacted in the event of a spill. 609-258-2711, Steve Elwood Provide as much of the following information as possible: Where has the hazardous material spill occurred? Paragraph 1910.120(q)(3)(ii) requires the implementation of an ICS.
Critiques done after an incident which include an evaluation of what worked and what did not and how could the incident be better handled the next time may be counted as training time. Submit a Safety Concern, EHS Assistant
Place spill control materials and protective equipment in a readily accessible location within or immediately adjacent to the laboratory. Turn off ventilation system, if possible. 
Diking and ditching, as well as use of absorbents like diatomaceous earth, are traditional techniques which have proven to be effective over the years. Those skilled support personnel, such as employees who work for public works departments or equipment operators who operate bulldozers, sand trucks, backhoes, etc., who may be called to the incident scene to provide emergency support assistance, should have at least a safety and health briefing before entering the area of potential or actual exposure.
For any given situation, equipment and clothing should be selected that provide an adequate level of protection. If the presence of toxic fumes is suspected: Copyright 2022 For MINOR spills, ensure that clean-up materials are compatible with spilled materials. 
Follow the steps below for hazardous spills (see Chemical Spill Notification flyer). Sustainability, Report an Incident Cover your nose and mouth with a cloth or mask. Alertus Login Remove the victims contaminated clothing. Thus PPE should be used in conjunction with other protective methods and its effectiveness evaluated periodically. Each hazardous waste site clean-up effort will require an occupational safety and health program headed by the site coordinator or the employer's representative. The use of vapor suppression agents for volatile hazardous substances, such as flammable liquids and those substances which present an inhalation hazard, is important for protecting workers.
If you think you may have been exposed to a hazardous material inform emergency responders immediately. In the event of a chemical spill, the individual(s) who caused the spill is responsible for prompt and proper clean-up. Program Manager - Chemical Safety Fact/Guide Sheets and Health Alerts, Emergency Notification and Incident Reporting, Occupational Medicine for Biomedical Research, Within capabilities and resources to clean, No inhalation hazard (i.e., no toxic vapor or toxic dust), Spill in easily accessible area or confined area (e.g., secondary containment or fume hood), Beyond capabilities and resources to clean, High risk for responder while cleaning up, Spill entering public areas, floor drains, or inaccessible locations (e.g., under cabinets). Spill kits are located in major hallways, stairwells and near elevators. All spill kits come with aChemical Spill Response Protocol visual guide. Sr. If the spill kit is not conspicuously located (e.g., a storage cabinet), then post signage marking its location. Immediately alert area occupants and supervisor, and evacuate the area, if necessary. In this scenario, decontamination procedures would not be necessary. To accomplish these goals, a comprehensive PPE program should include hazard identification, medical monitoring, environmental surveillance, selection, use, maintenance, and decontamination of PPE and its associated training. While evacuating, avoid inhaling the hazardous material by covering your mouth with a cloth or shirt.